Do You Need One?
- Commercial Buildings Plan Review, Building Permit & Fee Worksheet
- Code and Zoning Plan Checklist
- Construction Factors & Calculation Data
Springfield has adopted the International Building Code 2012 and International Model Codes 2012. The only non-2012 edition is the National Electric Code 2011.
For most building-related projects inside City limits, permits are required. This includes new construction, remodeling, upgrades and improvements to not only the structural part of a building, but also the mechanical systems. NOTE: If the legal notice of a violation has been sent, under the dangerous building ordinance, permits will be required to complete the work regardless of the type of work being done.
Code and Zoning Checklist
OurCode and Zoning Plan Checklist offers the citizen, contractor and design community a guide to follow regarding design submittal information. The items presented in the checklist represents the minimum information required. Some information may not be required due to the nature of the project.
A Building Permit is required to construct, enlarge, alter, move or demolish a structure; or change the occupancy of a building or structure requiring greater strength, exit or sanitary provisions; or to change to another use; or to install or alter any equipment for which provision is made or the installation of which is regulated by the Building Code.
An Electrical Permit is required to do all electrical work except the replacement of lamps, the connection of portable appliances to suitable, permanently installed receptacles, or for the replacement of overcurrent protective devices which have become defective or inoperative.
A Mechanical Permit is required to do all mechanical work except portable heating, ventilating and cooling equipment; any steam, hot or chilled water piping within any heating or cooling equipment regulated by the Mechanical Code; replacement or any minor part which does not alter approval of equipment or make it unsafe; any self-contained refrigeration system containing 10 lbs. or less of refrigerant, or actuated by motors of 1 horsepower or less.
A Plumbing Permit is required to do all plumbing work except for repairs which involve only the working parts of a faucet or valve, clearance of stoppages, or repairing or replacement of defective faucets or valves, provided alterations are not made in the existing piping or fixture.
All sprinkler work, underground or within a building shall be permitted under an “FIS” permit only.
Permits will no longer be issued based on the building permit submittals unless the entire system (underground and building) including the calculations are included as a part of the building permit submittals.
For detailed information on sprinkler permits, please read Administrative Ruling 2007-01.